News-Jiangsu Xiabang Refrigeration Equipment Co., Ltd

Wide application of heat exchangers in the medical industry

The development of heat exchangers has a long history. It is understood that in the early 1930s, Sweden first made spiral plate heat exchangers. Next, a plate-fin heat exchanger made of copper and its alloy materials was manufactured by the UK by brazing, which was used to dissipate heat from aircraft engines.

Difference between plate heat exchanger and shell and tube heat exchanger

Compared to plate heat exchanger gaskets, everyone is not unfamiliar. As for its installation method, it may not be so familiar. Today we will talk about three common installation methods of plate heat exchanger gaskets. I hope that for plate heat exchangers, When installing the gasket, it is easy to use.

What to do if the evaporator of the refrigeration system frosts?

Because the relative humidity of the air is relatively high. When the refrigeration system is operating normally, the surface temperature of the evaporator is much lower than the dew point temperature of the air, and moisture in the air will precipitate and condense on the evaporator tube wall. When the tube wall temperature is lower than 0 ° C, water dew will condense into frost.

Maintenance method and operation instructions of shell and tube heat exchanger

Tubular heat exchanger is the most widely used heat exchanger in chemical production. It has a simple structure, high heat exchange efficiency and strong adaptability (can be used under high or low temperature, high or low pressure conditions) .

Wide application of heat exchangers in the medical industry

The development of heat exchangers has a long history. It is understood that in the early 1930s, Sweden first made spiral plate heat exchangers. Next, a plate-fin heat exchanger made of copper and its alloy materials was manufactured by the UK by brazing, which was used to dissipate heat from aircraft engines.

Difference between plate heat exchanger and shell and tube heat exchanger

Compared to plate heat exchanger gaskets, everyone is not unfamiliar. As for its installation method, it may not be so familiar. Today we will talk about three common installation methods of plate heat exchanger gaskets. I hope that for plate heat exchangers, When installing the gasket, it is easy to use.